Did you know that the sounds of your metal drums can be altered with equalization? By boosting or cutting specific frequencies, you can change the character of your metal drums, making them sound fuller, brighter, or heavier.
EQ is an essential tool for metal drummers. You can achieve the perfect tone for your kit by boosting and cutting specific frequencies. This blog post will show how to boost and cut metal eq drums and frequency bands. We’ll also give tips on finding the right high frequencies for your kit. Let’s get started!
Image credit:pixabay.com
What Is EQ, And Why Is It Important For Metal Drums?
EQ means equalization, which refers to adjusting the balance of frequencies in a recording. EQ boosts or cuts specific frequencies to achieve the desired snare sound. It can make a recording sound brighter or darker, fuller or thinner, and so on. In the context of metal drums, EQ can be used to adjust the overall tone of the drums or to focus on specific frequencies that may need to be boosted or cut to achieve the desired sound.
EQ is an important tool for shaping the sound of metal drums because it can help to create a wide range of sonic possibilities. For example, if your drums sound as aggressive and powerful as possible, you might boost the lower frequencies and cut the higher ones.
Conversely, if you want your drums to sound tighter and more focused, you might cut the lower frequencies and boost the higher frequencies. EQ can also be used to bring out certain aspects of the drum sound, such as the snare drum’s attack or the cymbals’ decay. Experimenting with EQ is one of the best ways to discover what sound you want from your metal drums.
So, in summary, EQ is an important tool for metal drums because it allows you to adjust the overall tone of the drums and focus on specific frequencies that may need to be boosted or cut.
What Are The Best Frequencies For Metal Drums?
As any metalhead knows, the drums are a vital part of the genre. The pounding rhythms and double kicks create an intense sound that gets heads nodding and feet stomping. But great metal drums don’t just happen by accident – it takes careful EQing to get the perfect sound. So what are the best frequencies for metal drums?
Generally speaking, you’ll want to boost the low end for fatness and thump and add some highs for clarity and attack. But where specifically should you boost and cut? Here are some guidelines:
For the kick drum eq, start by boosting around 80 Hz for the body, then add some punch with a peak around 2-3 kHz. Start around 5 kHz and then back off until it sounds good. For the snare, you’ll want to add some crackle with a high-frequency boost, but don’t go too crazy, or it will start to sound harsh. You’ll want to focus on the “sizzle” range around 8-10 kHz for the hi-hats. And for the cymbals, you’ll want to emphasize the light frequencies around 12-15 kHz.
Of course, every drum kit is different, so you’ll need to experiment with EQ to find the frequencies that work best for your particular setup. But these guidelines should help you get started.
Boosting Metal Drum Frequencies
If you want your metal kick drums to cut through the mix, you’ll need to EQ them properly. Many engineers mistake boosting the highs, making the drums sound thin and tinny. Instead, it would be best to start by boosting the frequencies around 2-3kHz.
This will add some presence and make the drums easier to hear. Next, you should cut some low frequencies from around 200Hz to 500Hz. This will help tighten the sound and prevent the drums from becoming too muddy.
Pairing in, it would be best to boost the highs from around 10kHz to 12kHz. This will give the drums some extra shimmer and attack. By following these EQ tips, you’ll be able to get your metal drums sounding great in no time!

Cutting Metal Drum Frequencies
If your metal drums are sounding a little too harsh, you may want to consider cutting some of the frequencies. This can help to soften the sound and make it more pleasant to listen to. There are a few different ways that you can go about doing this. One option is to use an EQ pedal.
This will allow you to boost or cut specific frequencies, depending on your goal. Another option is to use a multi-band compressor. This will allow you to control the overall level of the drums and compress specific frequencies.
Whichever method you choose, experiment until you find a sound you are happy with. With a little bit of tweaking, you will be able to get your drums sounding just the way you want them.
Tips For Finding The Right Frequencies For Your Kit
As a metal drummer, you know that EQ is essential for making your kit sound right. But finding the right frequencies to boost and cut can be a challenge. Here are some tips to help you get started:
1. Start with the Kick Drum track: The kick drum is the foundation of your metal sound, so it’s important to get it sounding just right. Start by boosting the low frequencies and cutting the highs. Then, experiment with different EQ settings until you find the sound you’re looking for.
2. Experiment with the Snare Drum eq: The snare drum is another important element of your metal sound. Again, start by boosting the low frequencies and cutting the highs. Then, experiment with different EQ settings until you find the good kick drum sound you’re looking for.
3. Don’t Forget the Toms: The tom drums are an integral part of your metal sound, so don’t forget to EQ them. Start by boosting the low frequencies and cutting the highs. Then, experiment with different EQ settings until you find the sound you’re looking for.
4. Pay Attention to Your Cymbals: Your cymbals are also important in shaping your metal sound. Start by boosting the highs and cutting the lows. Then, experiment with different EQ settings until you find the sound you’re looking for.
5. Experiment: The only way to find the right frequencies for your kit is to experiment. Try different EQ settings and see how they affect the sound of your drums. With a little trial and error, you’ll be able to find the perfect kick drum EQ settings for your kit.
EQ is an important tool for any drummer, but it’s especially important for metal drummers. By following these tips, you’ll be able to find the right frequencies for your kit and get your metal sound just the way you want it.
Tips For Using EQ On Metal Drums
When mixing metal drums, it’s important to use EQ to Boost and Cut the frequencies that will help the drums cut through the mix. Here are some tips for using EQ on metal drums:
Start with a high-pass filter to remove any unwanted low frequencies.
Boost the lows around 80Hz to add weight and power to the kick drum.
Around 200Hz, you can boost or cut depending on whether you want the drums to sound more aggressive or mellower.
For more attacks and snap on the snare, boost the highs around 3kHz.
To add air and shimmer to the cymbals, boost the highs around 10kHz.
Image credit:pixabay.com
Conclusion
EQ is an important tool for metal drummers to help them find their sound and ensure they are heard above the bass guitar and drum bass. Understanding how to boost and cut frequencies can make your drums sound powerful and cut without overpowering the other instruments.
In addition, proper mic placement will also help ensure that your drums are heard clearly in the mix. Experiment with these techniques and see what works best for you!